The Focus Pro All-in-One Combo from DJI equips you with all the tools you need to achieve precise FIZ control in single-shooter configurations. The combo includes a LiDAR unit, a Focus Pro Motor, a Focus Pro Hand Unit, and a Focus Pro Grip for more accurate, distant, and intelligent autofocus. A carrying case holds all the components for travel to your next shoot.

Focus Pro LiDAR

Designed for both the RS 3 Pro and RS 4 Pro gimbal stabilizers, the DJI Focus Pro LiDAR unit makes achieving intelligent autofocus intuitive and easy for solo cinematographers.

The rangefinder unit makes focusing on objects in motion a breeze thanks to its expanded 76,800 ranging points, 30 Hz refresh rate, and 65.6′ maximum detection area. This allows it to support both wide-angle and telephoto lens configurations.

When paired with the Focus Pro Motor, the LiDAR unit can facilitate autofocus with compatible lenses.

The unit’s 76,800 ranging points can project within a 1.6 to 65.6′ area.

It also features a built-in camera with an equivalent focal length of 30mm and a wide FOV of 70°, catering to the focusing needs of most scenarios.

Focus Pro Grip

Attach this DJI Focus Pro Grip to either side of your DJI R3 Pro or RS 4 Pro gimbal and control your Focus Pro Motor configuration for precise FIZ. The grip has an integrated 1.8″ touchscreen display, front dial, mode button, and record buttons for intuitive control over your camera and lens operations. Toggle AMF mode to engage autofocus, causing the front dial to rotate simultaneously and allowing cinematographers to visually observe the focus status on the monitor and via tactile feedback. Manual mode can then be engaged and disengaged intuitively.

Three USB-C ports facilitate communication between the Focus Pro LiDAR unit, Focus Pro Motor, and your camera. 2.4 GHz and Bluetooth communication allow for wireless transmission.

Use the built-in NATO clamp and included adapters to attach the grip to either side of your gimbal configuration. A built-in battery keeps the grip running for 2.5 hours at a time, and it can recharge via PD fast charging technology using the USB-C port.

Focus Pro Motor

Add focus, iris, or zoom control to your camera when mounted on select RS gimbal stabilizers with the DJI Focus Pro Motor.

This updated motor features a 30% speed increase over the previous model with 300 gear teeth and 10ms low latency.

Control the motor via 2.4 GHz transmission technology from up to 524.9′ away.

When used in zoom control mode, the Focus Pro can perform Power Zoom for PZ lenses, Clear Image Zoom, and external focus motor zoom for precise focusing. Its updated 15mm rod mount makes it more universally compatible with camera mounting configurations. Pair two Focus Pro Motors with the DJI RS 4 Pro to adjust focus with the gimbal’s onboard dial and zoom with the onboard joystick for efficient lens control.

Focus Pro Hand Unit

Use the DJI Focus Pro Hand Unit to facilitate FIZ control of your manual lenses in tandem with your Focus Pro Motor and your RS 3/4 Pro gimbal stabilizer. Integrated 2.4 GHz technology can control the Focus Pro Motor from up to 524.9′ away. Toggle AMF mode to engage autofocus, causing the focus knob to rotate simultaneously and allowing cinematographers to visually observe the focus status on the monitor and via tactile feedback. Manual mode can then be engaged and disengaged intuitively.

The A-B electronic marking points provide tactile feedback for endpoints and step-less damping adjustment, ensuring more accurate focusing. The unit also allows you to toggle the recording of your camera via Bluetooth.

A 1.09″ touchscreen display displays your current settings. Power is delivered to the hand unit via an NP-F550 battery.

Carry Case

A stylish hard-shell case is included to store and transport the entire kit.

General

Compatibility

DJI RS 4 Pro Gimbal Stabilizer / RS 3 Pro Gimbal Stabilizer

Display

Panel Type	LCD
Size	1.8″
Touchscreen	Yes

Inputs/Outputs

USB I/O

4 x USB-C Female Input

Wireless

2.4 GHz Radio/RF / Bluetooth

Power

Power Source	Battery
Battery Type	Built-In Rechargeable
DC Input Power	6.6 to 8.4 VDC

Physical

Mounting	1x NATO Clamp 2x NATO Rail 1x M4 Screw 1x 1/4″-20 Screw
Color	Black
Operating Conditions	-4 to 113°F / -20 to 45°C
Cable Length	15.7″ / 40 cm
Dimensions	6.4 x 2.9 x 2.3″ / 162 x 73 x 59 mm
Weight	17 oz / 482 g